Profile Bar - madVR Labs Envy User Manual

Below is an example of Base Settings defined for Upscaling & Sharpening. These settings are
therefore the defaults that Envy will use for Upscaling & Sharpening, regardless of resolution,
source device, or any other condition – unless overridden.
The area highlighted in the menu page shown below is the Profile Bar. Since the Base Settings
option is selected in the profile bar, the menu values shown here reflect the Base Settings.

3.2 Profile Bar

The Profile Bar is used to select whether the currently displayed menu settings are for the Base
Settings, the Active Settings, or a specific profile. Therefore, the Profile Bar will always contain a
selection for at least the Base Settings and Active Settings, and for each profile (if any) that the
menu page has been added to.
In the image above, we know the menu settings shown are for the Base Settings, since "Base
Settings" is selected in the Profile Bar. Any changes made to these menu options while "Base
Settings" is selected in the Profile Bar will therefore be applied to the Base Settings (and hence
become the new system defaults).
Note: Envy has both "Settings" menu pages and "Configuration" menu pages. There is no
difference between "Active Settings" vs "Active Configuration", or between "Base Settings" vs
"Base Configuration" that you will see in the Profile Bar. These are simply different labels for the
same thing, depending on the type of menu page you are viewing.
8
madVR Envy – Profile User Guide
Copyright © madVR Labs, LLC. All rights reserved.