Table of Contents
Advertisement
4.
Setting up the GloMax
4.A. Setup
1.
Place the GloMax
to open and close the lid. Position the luminometer so that the touch screen faces you.
2.
Connect the power supply into the back of the luminometer.
3.
Plug the power cord into a wall outlet. See Section 11.C for power requirements.
4.
Turn the On/Off switch to the "On" position (Figure 2).
Note: Touch screen calibration can drift during shipment. If this happens, touch screen alignment will be affected
and buttons may be difficult to press or unresponsive. See Section 8.B for Touch Screen Calibration.
4.B. Software Installation and System Connection
To export data from the luminometer to an Excel spreadsheet, you must first install the GloMax
Software on a PC with an available serial port or USB connector. The GloMax
compatible with 32-and 64-bit PCs using Windows
Home and Business Edition (32- and 64-bit versions) or Microsoft
1.
Download the software from the Promega website: www.promega.com/resources/software-firmware/
glomax-systems/glomax-20-20-luminometer/. This will initiate the installation program. When
installation is complete, the GloMax
the Programs menu.
2.
To establish a connection between the luminometer and the PC, connect the USB cable between the luminometer
and your PC. If connecting to the PC with a USB/RS-232 adaptor, we recommend using the Tripp-Light, Model#
U209-000-R, which can be purchased from Tripp Lite (Cat.# U209-000-R), or from Promega (Cat.# TS2520).
When using a USB-Serial adaptor, you may need to download the appropriate computer driver available at:
www.tripplite.com. Select the PC COM port in the software using the Select COM port button to establish a
connection with the instrument.
Alternatively, connect the luminometer to a printer to print the data as they appear onscreen. A thermal printer
(Cat.# E2821) is available separately from Promega.
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
www.promega.com
20/20 Luminometer
®
20/20 Luminometer on a flat, level surface. Allow at least 6 inches (16cm) of vertical clearance
®
Spreadsheet Interface Software icon will appear on your PC desktop and in
®
7 Professional Service Pack 1 with either Microsoft
®
Office 2007 (32-bit version).
®
®
Spreadsheet Interface
Spreadsheet Interface Software is
®
TM276 · Revised 5/21
Office 2010
®
5
Advertisement
Table of Contents
