Table of Contents
Advertisement
2 Settings
•
When the [Confirm] button is clicked, the registered information of the CA certificate will be
displayed in the "CA Certificate - Confirm" dialog box. (Only "Organizational Unit" will be displayed
with an asterisk (*).)
•
When the [Delete] button is clicked, the installed CA certificate will be deleted.
•
When "HTTPS" is selected for "Connection", it is impossible to delete the CA certificate.
•
To update the CA certificate, perform step 1 and 2.
IMPORTANT
•
Before deleting the valid CA certificate, confirm that there is a backup file of the CA certificate on the
PC or another media. The backup file of the CA certificate will be required when installing the CA
certificate again.
•
When the CA certificate has expired, the HTTPS function will become unavailable. When the camera
is restarted, the connection protocol will be changed to HTTP. Update the CA certificate before it
expires.
•
The expiration date of the CA certificate can be checked by double-clicking the CA certificate file issued
by CA.
2.8.3.5 Configuration of the connection protocol
1.
Select "HTTP" or "HTTPS" for "Connection" to determine the protocol used to access the camera.
•
HTTP: Only the HTTP connection is available.
•
HTTPS: Only the HTTPS connection is available.
2.
Designate the HTTPS port number to be used for "HTTPS port".
•
Available port number: 1 - 65535
•
Default: 443
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 554, 995, 10669, 10670, 59000 - 61000
3.
Click the [Set] button.
→
It will become possible to access to the cameras using the HTTPS protocol. (®page 9, page 16,
page 18)
Note
•
When the connection setting is changed, after waiting for a while, access the camera again with either
"http://IP address of the camera" or "https://IP address of the camera" depending on the changed
setting.
•
When using the self-signed certificate:
142
Operating Instructions
Advertisement
Table of Contents
