Testing The Scsi Subsystem - IBM ThinkPad 365C 2625 Maintenance Manual

Testing the SCSI Subsystem

Note: If a SCSI adapter is installed in an PCI adapter
card slot, remove it before running the SCSI
diagnostic program.
1. When you select Test SCSI Subsystem on the Main
Menu, the diagnostics program checks the system
configuration for SCSI devices and displays the
following if no SCSI controller is found.
If a SCSI controller is found, the computer goes on to
initialize the SCSI devices and displays the following.
SCSI Subsystem Diagnostics Utility V2.1
Scanning Target #n
Enter F3=Exit
2. If the initialization fails, the following screen appears.
SCSI Subsystem Diagnostics Utility V2.1
SCSI Initialization Failed
Enter F3=Exit
ThinkPad SelectaDock Docking System
561