IBM ThinkPad 365C 2625 Maintenance Manual page 574

3. If the initialization ends successfully, the following
screen appears. Select an item.
SCSI Subsystem Diagnostics Utility V2.1
Select one
1. Run the tests one time
2.Run the tests continuously
Enter F3=Exit
4. The SCSI Devices Test Menu appears. Select one
of the devices.
SCSI Subsystem Diagnostics Utility V2.1
SCSI Devises Test Menu
Select one
1.All
2. (device name)
3. (device name)
4. (device name)
5. (device name)
6. (device name)
7. (device name)
8. (device name)
9. (device name)
0. (device name)
Enter F3=Exit
The device name may be any of the following:
SCSI Hard Disk
SCSI Tape Drive
SCSI CD-ROM
SCSI Optical Drive
or No Device
The IBM ThinkPad Dock I SCSI controller appears as
ID7 on the screen.
5. If a SCSI device exists and a test media is required to
test the SCSI device, the following pop-up menu
appears (shows the case of a SCSI tape drive).
562
IBM Mobile Systems - ThinkPad HMM Volume 3
(ID0)
(ID1)
(ID2)
(ID3)
(ID4)
(ID5)
(ID6)
(ID7)
(ID8)