Checkout Guide - IBM ThinkPad 365C 2625 Maintenance Manual

Checkout Guide

Use the following procedure as a guide for computer
problems.
Note: The diagnostic tests are intended to test only IBM
products. Non-IBM products, prototype cards, or
modified options can give false errors and invalid
system responses.
Important
When the Problem Determination Procedure in the
operation manual that is supplied with the adapter or
device says "Have the system unit serviced", this
means the computer and IBM ThinkPad Dock I.
1. Obtain the failing symptoms in as much detail as
possible.
2. Verify the symptoms by attempting to recreate the
failure by running the diagnostic test or by repeating
the same operation.
Note: To run the diagnostics, refer to "How to Run
the Diagnostics" on page 557.
3. Use the following table with the verified symptom to
determine which page to go to. Search the
symptoms column and find the description that best
matches your symptom; then go to the page shown in
the "Go to" column.
Symptoms (Verified)
Power failure. (The
power indicator does not
go on or stay on.)
POST does not
complete. No
beeps/error code are
indicated.
POST beeps, but no
error codes are
displayed.
POST detected an error
and displayed numeric
error codes.
The diagnostic test
detected an error and
displayed an FRU code.
ThinkPad SelectaDock Docking System
Go to
"Power Supply" on
page 552.
"Symptom-to-FRU
Index" on page 565,
and then use the No
Beep Symptoms table.
"Symptom-to-FRU
Index" on page 565,
and then use the Beep
Symptoms table.
"Symptom-to-FRU
Index" on page 565,
and then use the
Numeric Error Codes
table.
"Diagnostic Error Codes"
on page 568.
551