IBM ThinkPad 365C 2625 Maintenance Manual page 373

Symptom / Error FRU / Action in Sequence
185 1. Reset the startup
(The startup sequence is
not valid. Suspect that
power was off when the
startup sequence was being
updated.)
186 1. System board
188 1. Set the system
(EEPROM CRC #2 error.)
190 1. Go to "Checking the
(Depleted battery pack was
installed when the power
was on.)
191XX 1. System board
(PM initialization error.) 2. CPU card
195 1. Check if the
(The configuration read from
the hibernation area does
not match the actual
configuration.)
196 1. Run the hard disk
(Read error occurred in the
hibernation area of the 2. Hard disk drive
HDD.)
1XX 1. System board
2XX 1. Go to "Memory
201: Memory data
error.
2. DIMM, or DIMM
202: Memory line error
00–15.
3. System board
203: Memory line error
16–23.
205: Memory test
failure on on-board
memory.
221: ROM to RAM
remap error.
301, 303, 304, 305, 3XX 1. Go to "Keyboard and
(301: Keyboard error.)
2. Keyboard
3. Video card
4. External numeric
5. External keyboard
6. Keyboard/mouse cable
7. System board
ThinkPad 760 (9546, 9547)
sequence in
Easy-Setup.
identification using
the ThinkPad
Hardware
Maintenance Diskette
Version 1.20.
Battery Pack" on
page 351.
configuration was
changed.
For example, check if
the disk drive is from
another computer.
drive test.
Checkout" on
page 342.
Adapter
Auxiliary Input
Device Checkout" on
page 345.
keypad
361