Vega VEGABAR 86 Operating Instructions Manual page 35

Special parameters
Scaling (1)
Scaling (2)
Device name
Instrument version
Factory calibration date
VEGABAR 86 • Modbus and Levelmaster protocol
6 Set up the sensor with the display and adjustment module
type of the source data as well as the target sensor are displayed. If
the data do not match, a fault message is outputted or the function is
blocked. The data are saved only after release.
In this menu item you gain access to the protected area where
you can enter special parameters. In exceptional cases, individual
parameters can be modified in order to adapt the sensor to special
requirements.
Change the settings of the special parameters only after having con-
tacted our service staff.
In menu item " Scaling" you define the scaling variable and the scal-
ing unit for the level value on the display, e.g. volume in l.
In menu item " Scaling (2)" you define the scaling format on the dis-
play and the scaling of the measured level value for 0 % and 100 %.
6.5.5 Info
In this menu item, you can read out the instrument name and the
instrument serial number:
In this menu item, the hardware and software version of the sensor is
displayed.
In this menu item, the date of factory calibration of the sensor as well
as the date of the last change of sensor parameters are displayed via
the display and adjustment module or via the PC.
35