Table of Contents
Advertisement
2.2.2. How to Setup the Standard PWM
Please make sure you have completed the steps in
section 2.1
before operating
the following steps.
Description of the demo:
In this example, we will use the demo to set I-8088W as "Continuous" mode and
its frequency is 10 Hz, PWM duty is 50%. When we send the "Start Normal
PWM" commend, the DI0 will blinking per 0.5s.
Wire connection of I-8088W:
To do this, you need to wire PW0 to DI0, DI.COM to External 5V, PWM.GND to
External GND. (Please refer to
section 1.2 Pin
Assignment)
Now, follow the steps to configure the related parameter:
Step1: Run "8080demo.exe"
Right click on the "8088demo.exe" and click "Run". You can also double-click on
the file name to run.
I-8088W API Reference Manual, Version 1.0.0, Aug. 2010
--- 12
Advertisement
Table of Contents
