NETGEAR WAX214 User Manual page 62

NETGEAR WiFi 6 AX1800/AX3600 Dual Band PoE/PoE+ Access Points, WAX214 and WAX218
The Device Status page displays.
4. Under Network, select Wireless.
The Wireless Settings page displays.
5. In the Management Interface - 2.4G section, clear the Enabled check box.
6. Click the Save button.
Your settings are saved but not yet applied.
A pop-up window displays. The window shows the number of changes to be applied.
7. In the pop-up window, click the Apply button.
Your changes are applied. If the WiFi link must be reestablished, the page displays
the number of seconds before the access point is back online.
Manage the Basic Radio and
WiFi Settings
62 User Manual