NETGEAR WAX214 User Manual page 113

NETGEAR WiFi 6 AX1800/AX3600 Dual Band PoE/PoE+ Access Points, WAX214 and WAX218
Table 4. Device Information section (Continued)
Setting
MAC Address Wireless
LAN - 2.4GHz
MAC Address Wireless
LAN - 5GHz
Country
Current Local Time
Uptime
Firmware Version
Device Version
Management VLAN ID
LAN Speed
Table 5. Memory Information section
Setting
Total Available
Free
Monitor the access point and its
Network Connections
Description
The fixed MAC address of the 2.4 GHz radio interface.
The fixed MAC address of the 5 GHz radio interface.
The country and region that you set for the access point operation. For more
information, see Change the country and region of operation on page 48.
The time that the access point detected. For more information, see Manage the date
and time settings on page 97.
The period since that last time the access point started or rebooted.
The firmware version. For more information, see Upgrade the firmware on page 90.
The device version.
Shows whether management traffic is tagged or untagged. For more information,
see Specify an existing management VLAN on page 108.
The speed of the LAN/PoE (model WAX214) or LAN/PoE+ (model WAX218) port.
Description
The total memory in kB and the available memory in kB and percentage.
Note: 1 kB = 1 kilobyte = 1000 bytes.
The total memory in kB and the free memory in kB and percentage.
113 User Manual