Set Up The Access Point With A Non-Poe Network Connection - NETGEAR WAX214 User Manual

NETGEAR WiFi 6 AX1800/AX3600 Dual Band PoE/PoE+ Access Points, WAX214 and WAX218
LED
5 GHz WLAN
2.4 GHz WLAN
LAN
Power
You can now access the access point for initial configuration (see Initial log-in process
on page 26).

Set up the access point with a non-PoE network connection

You can connect the access point to a regular switch, that is, a non–Power over Ethernet
switch in your network. The switch must be connected to a network router that is
connected to the Internet. If you use a regular switch, the access point requires a power
adapter, which is supplied for model WAX214PA and model WAX218PA. (For model
WAX214 and model WAX218, a power adapter is an option that you can purchase.)
Figure 9. Set up model WAX214 with a non-PoE connection to your network
Installation and Initial Log-in
Description
The 5 GHz WLAN LED lights solid blue or blinks blue.
The 2.4 GHz WLAN LED lights solid blue or blinks blue.
The LAN LED lights solid blue or blinks blue.
The Power LED lights solid amber.
24 User Manual