Table of Contents
Advertisement
3.3.9
Network Stack Configuration
Network Stack
This item allows user to disable or enable the UEFI network stack. Configuration
options: [Disabled] [Enabled]
The following items appear only when you set the previous item to [Enabled].
Ipv4 PXE Support
This item allows user to disable or enable the Ipv4 PXE Boot support.
Configuration options: [Disabled] [Enabled]
Ipv6 PXE Support
This item allows user to disable or enable the Ipv6 PXE Boot support.
Configuration options: [Disabled] [Enabled]
3.3.10
USB Configuration
XHCI Hand-off
Allows you to enable or disable XHCI Hand-off. Set to [Disabled] to support
operating systems without a built-in USB 3.0 driver.
Configuration options: [Enabled] [Disabled]
USB Mass Storage Driver Support
Allows you to enable or disable USB mass storage driver support.
Configuration options: [Disabled] [Enabled]
U32G2_1/2/3
Allows you to enable or disable the USB port. Once set to [Disabled], any USB
devices plugged into the connector will not be detected by BIOS or OS.
Configuration options: [Disabled] [Enabled]
U2_4
Allows you to enable or disable the USB port. Once set to [Disabled], any USB
devices plugged into the connector will not be detected by BIOS or OS.
Configuration options: [Disabled] [Enabled]
USB1/2/3/4
Allows you to enable or disable the USB port. Once set to [Disabled], any USB
devices plugged into the connector will not be detected by BIOS or OS.
Configuration options: [Disabled] [Enabled]
3.3.11
NVMe Configuration
This page displays the NVMe controller and drive information.
3-8
J6412T-IM-A
Advertisement
Table of Contents
