Table of Contents
Advertisement
3.3.9
Network Stack Configuration
Network Stack
This item allows user to disable or enable the UEFI network stack. Configuration
options: [Disabled] [Enabled]
The following two items appear only when you set the previous item to
[Enabled].
Ipv4 PXE Support
This item allows user to disable or enable the Ipv4 PXE Boot support.
Configuration options: [Disabled] [Enabled]
Ipv6 PXE Support
This item allows user to disable or enable the Ipv6 PXE Boot support.
Configuration options: [Disabled] [Enabled]
3.3.10
USB Configuration
Legacy USB Support
Configuration options: [Enabled] [Disabled] [Auto]
[Enabled]
[Disabled]
[Auto]
XHCI Hand-off
This item functions as a workaround for OSes without XHCI hand-off support. The
XHCI ownership change should be claimed by XHCI driver.
Configuration options: [Enabled] [Disabled]
USB Mass Storage Driver Support
Allows you to enable or disable USB Mass Storage Driver Support.
Configuration options: [Disabled] [Enabled]
U32G2_1/2
Allows you to enable or disable the USB port. Once set to [Disabled], any USB
devices plugged into the connector will not be detected by BIOS or OS.
Configuration options: [Disabled] [Enabled]
U32G1_3/4
Allows you to enable or disable the USB port. Once set to [Disabled], any USB
devices plugged into the connector will not be detected by BIOS or OS.
Configuration options: [Disabled] [Enabled]
3-10
Enables Legacy USB support.
Keeps USB devices available only for EFI applications.
Allows the system to detect the presence of USB devices at
startup. If any USB device(s) is detected, the USB controller
legacy mode is enabled. If none is detected, the legacy USB
support is disabled.
H610M-IM-A
Advertisement
Table of Contents
