Table of Contents
Advertisement
CAUTION! Never connect a 1394 cable to the USB headers. Doing so will
damage the motherboard.
NOTE: The USB cables are purchased separately.
5.
SATA Power connector (4-pin SATA_PWR)
This connector is for the SATA power cable. The power cable plug is
designed to fit this connector in only one orientation. Find the proper
orientation and push down firmly until the connector completely fits.
IMPORTANT: The SATA power connector supports 1A current to the
maximum.
6.
SATA 6.0 Gb/s port (7-pin SATA6G)
This port connects to a SATA 6.0 Gb/s hard disk drive or an optical drive via
a SATA 6.0 Gb/s signal cable.
Connector type
Chapter 2: Motherboard information
SATA_PWR1
WAFER HD 7p, 1.27mm pitch
PIN 1
SATA6G
GND
RSATA_RXP
RSATA_RXN
GND
RSATA_TXN
RSATA_TXP
GND
2-13
Advertisement
Table of Contents
