Hdd/Ssd Smart Information; Network Stack Configuration; Monitor Menu; Q-Fan Configuration - Asus PRIME X570-PRO Manual

3.6.9

HDD/SSD SMART Information

This menu displays the SMART information of the connected devices.
NVM Express devices do not support SMART information.
3.6.10

Network Stack Configuration

The items in this menu allow you to enable or disable the UEFI network stack
3.7

Monitor menu

The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
3.7.1

Q-Fan Configuration

The subitems in this menu allow you to configure the Q-Fan features.
Qfan Tuning
Click this item to automatically detect the lowest speed and configure the minimum duty cycle
for each fan.
Chassis Fan(s) Configuration
Configure chassis fan(s) detailed settings of individual fans including: profile, duty,
temperature and more.
3.8

Boot menu

The Boot menu items allow you to change the system boot options.
3.8.1

Boot Configuration

Fast Boot
[Disabled]
[Enabled]
The following items appear only when you set the Fast Boot to [Enabled].
Next Boot after AC Power Loss
[Normal Boot] Returns to normal boot on the next boot after an AC power loss.
[Fast Boot] Accelerates the boot speed on the next boot after an AC power loss.
Setup Mode
[Advanced Mode]
[EZ Mode]
3-17
Allows your system to go back to its normal boot speed.
Allows your system to accelerate the boot speed.
This item allows you to go to Advanced Mode of the BIOS after
POST.
This item allows you to go to EZ Mode of the BIOS after POST.
ASUS PRIME X570-PRO