Access Levels; Language; Navigation; Figure 11 - Hmi Language Selection - GE CB Watch 3 User Manual

Access Levels

Access to the HMI and the data is restricted according to several username login levels,
each protected by passwords. The various increasing levels of access are listed below.
Each next level has the rights of the preceding level plus those listed:
1 Username:
Access to all measurements and parameters is read-only
It is possible to change the language of the HMI
2 Username:
Only parameters for setting alarms are adjustable
It is possible to download parameters file
3 Username:
All of the parameters relative to the application are adjustable
In particular all those required for setting up the system

Language

Once you have access to the HMI of the CBW3, the language tab enables you to select
the language that the HMI will use. Click on the required flag first and then click on any
section of the top toolbar, the language will automatically change.

Navigation

Navigation through the menus is done by:
(1) Selecting one the menu section in the toolbar
- Measurements
- Settings
- System
- Overview
- Language
CB Watch 3 User Manual
"user"
"supervisor"
"specialist"
Figure 11 – HMI language selection
Default password:
Default password:
Default password:
v6.3 - May 2019
leave blank
"supervisor"
"specialist"
Page 14 of 100