Advertisement
Quick Links
inStallation inStrUCtionS
C8QV SerieS Split SyStem UnCaSed indoor CoilS - QUiCk ConneCt
important
attention inStallerS:
it is your responsibility to know this product better than your customer. this includes being able
to install the product according to strict safety guidelines and instructing the customer on how
to operate and maintain the equipment for the life of the product. Safety should always be the
deciding factor when installing this product and using common sense plays an important role as
well. pay attention to all safety warnings and any other special notes highlighted in the manual.
improper installation of the coil or failure to follow safety warnings could result in serious injury,
death, or property damage.
these instructions are primarily intended to assist qualified individuals experienced in the proper
installation of this appliance. Some local codes require licensed installation/service personnel
for this type of equipment. please read all instructions carefully before starting the installation.
return these instructions to the customer's package for future reference.
do not deStroy. pleaSe read CareFUlly & keep in a SaFe plaCe For FUtUre reFerenCe.
Advertisement
Related Manuals for Nortek C8QV Series
Summary of Contents for Nortek C8QV Series
- Page 1 C8QV SerieS Split SyStem UnCaSed indoor CoilS - QUiCk ConneCt important attention inStallerS: it is your responsibility to know this product better than your customer. this includes being able to install the product according to strict safety guidelines and instructing the customer on how to operate and maintain the equipment for the life of the product.
- Page 2 General inFormation C8QV series coils are designed for upflow or downflow applications and incorporate single shot coupling refrigerant WarninG: connections for easy installation. • Cooling/heating equipment must be properly sized improper installation, service, adjustment, or and installed in accordance with the manufacturer’s...
- Page 3 Coil inStallation 4. Connect the couplings as follows: a.) Line up the refrigerant line with the coil coupling and thread together by hand to ensure proper thread WarninG: mating. Hold the hex of the male coupling with a wrench and slowly wrench tighten the union nut until eleCtriCal SHoCk or Fire HaZard a definite resistance (bottoming out) is felt.
- Page 4 Figure 1. C8QV Coil dimensions table 2. air Handler matches inStaller: pleaSe leaVe tHeSe inStrUCtionS WitH tHe eQUipment oWner. Specifications & illustrations subject to change without notice or incurring obligations (08/16). © Nortek Global HVAC LLC 2016. All Rights Reserved. 10144900 (NEW)