Page 1
INSTALLATION INSTRUCTIONS C84DA Series Split System Uncased Indoor Coils - Downturn IMPORTANT ATTENTION INSTALLERS: It is your responsibility to know this product better than your customer. This includes being able to install the product according to strict safety guidelines and instructing the customer on how to operate and maintain the equipment for the life of the product.
IMPORTANT SAFETY INFORMATION WARNING: Please read all instructions before servicing this equipment. Pay attention to all safety warnings and any other special This unit must be installed in accordance notes highlighted in the manual. Safety markings are with the instructions outlined in this manual used frequently throughout this manual to designate a during the installation, service, and operation degree or level of seriousness and should not be ignored.
GENERAL INFORMATION COIL INSTALLATION C84DA series coils are designed for upflow or downflow WARNING: applications and are equipped with down turned refrigerant connections and are ready for brazing. ELECTRICAL SHOCK, FIRE OR EXPLOSION • Check the coils orifice size and confirm that it’s suitable HAZARD for application with the intended outdoor unit.
Connecting the Linesets Condensate Drain 1. Route and cut both lineset tubes to proper length in CAUTION: accordance with the outdoor unit specifications. Verify the ends are round, clean, and free of any burrs. The coil must be level to ensure proper 2.
Air Filter Air filters are not supplied as an integral part of this coil; however, an air filter kit is available. Refer to the Replacement Parts List for available part numbers. The filter must be installed upstream of the coil and inspected frequently.