Index B400 Operating Instructions And Maintenance Instructions page 66

Hide thumbs Also See for B400:

Table of Contents

Example: Coolant drain on the clamping cylinder

Check the cooling lubricant drain (X) on the clamping cylinder. Check that the

drain is free and contains no chips. Loosen screws and remove cooling

lubricant drain of the clamping cylinder. Remove chips or other impurities and

ensure that the cooling lubricant can drain off. Then reassemble and tighten the

screws.

Due to different requirements and/or specifications of the

respective manufacturers, be sure to review the respective

manufacturer's documentation!

Check and potentially replace O-rings or other seals on the clamping devices.

O-rings and other seals on the clamping devices prevent that chips or cooling

lubricant penetrate into the hydraulic circuit or even into the mechanical

components of the respective assemblies where they can cause significant

damage. In any case, make sure that the seals recommended by the

manufacturer are used or installed during maintenance or repair work.

6. Check the condition/tightness of the power and encoder connections as well as

the fluid lines of the respective components.

Maintenance Summary - 4.000 Operating hours

Maintenance Instructions

B400

DIE150EN - 05.06.2019

Table of Contents