Sim1 And Sim2; Figure 17. Sim1 And Sim2 Interface; Table 6. Sim1 Connector Pin Description - Sierra Wireless AirPrime HL Development Kit User Manual

Development Kit User Guide
3.6.

SIM1 and SIM2

The HL Series Development Kit has two SIM connectors:

SIM1 (CN800)

SIM2 (CN802)
The development kit also supports a SON8 embedded SIM (U805) which can be connected to the
SIM1 interface of the embedded module by shorting CN804 with a jumper.
CN802
CN804
CN803
U805
Figure 17. SIM1 and SIM2 Interface
Note: Sierra Wireless recommends that SIM1 be used for single SIM applications.
Table 6. SIM1 Connector Pin Description
Pin Number Signal Name
1 UIM1_VCC
2 UIM1_RESET
3 UIM1_CLK
4 CC4
5 GND
6 VPP
7 UIM1_DATA
8 CC8
9 VIO
10 UIM1_DETECT
11,12,13,14 GND
* VIO = 1V8 or 2V8 depending on the HL embedded module.
4114877
I/O I/O Type
1V7 << 1V9 or
O
2V7 << 2V95
1V7 << 1V9 or
O
2V7 << 2V95
1V7 << 1V9 or
O
2V7 << 2V95
Not used
Not used
1V7 << 1V9 or
I/O
2V7 << 2V95
Not used
I VIO*
I VIO*
Rev 5.0
Description
SIM Power Supply
SIM Reset
SIM Clock
Ground
SIM Data
VIO supply from module
SIM Card Detect
Ground casing
October 12, 2015
Interfaces
SW800
CN600
CN800
27