Development Kit User Guide
2.2.3.
Snap-In Connector
The Snap-in connector houses the HL series embedded module and allows easy switching between
any of the supported HL series embedded module.
Note:
The HL8549x module does not use this connector as it is soldered directly on the development kit.
Figure 3.
Snap-in Connector
Note:
To ensure that the HL embedded module works properly with the development kit, make sure that
the HL series embedded module is positioned properly inside the Snap-in connector.
Refer to the following figures for examples of the correct module orientation inside the Snap-in
connector.
Figure 4.
Module Position for HL6528x (without label)
4114877
Rev 5.0
General Description
October 12, 2015
18