Callback Security Commands; Cba Callback Attempts; Cbd Callback Delay; Cbf? Callback Failed Attempts Display - Multitech MultiModem SocketModem MT9234 Series At Commands Reference Manual

Callback Security Commands

Note: Callback Security Commands do not work with parallel, USB, PCI, PCIe.
#CBA
Description:
Syntax:
Values:
Default:
#CBD
Description:
Syntax:
Values:
Default:
#CBF?
Description:
Syntax:
Values:
#CBFR
Description:
Syntax:
Values:
#CBI
Description:
Syntax:
Values:
Default:
#CBN
Description:
Syntax:
Values:
Defaults:
Multi-Tech Systems, Inc. AT Commands for the MultiModem & SocketModem MT9234 Series (S000434H)
Downloaded from Elcodis.com electronic components distributor
Chapter 1 – AT Commands, S-Registers, and Result Codes
Callback Attempts
Sets the number of callback attempts that are allowed after passwords have been
exchanged between modems.
AT#CBA<value>
1–255
4
Callback Delay
Sets the length of time (in seconds) that the modem waits before calling back the
remote modem.
AT#CBD<value>
0–255
15
Callback Failed Attempts Display
Requests the number of failed callback passwords since reset or power-up. This
number can be stored to nonvolatile memory using the &W command.
AT#CBF?
N/A
Callback Failed Attempts Reset
Resets the number of failed callback passwords to 0. This does not reset the number
stored in nonvolatile memory.
AT#CBFR
N/A
Local Callback Inactivity Timer
Sets the time (in minutes) that the modem waits for a command before forcing the
user to enter the setup password again.
AT#CBI<value>
1–255
20
Store Callback Password
Sets the callback security password for the y memory location. The password must
have 6 to 10 characters, and cannot include the + or - characters.
AT#CBN<y=x>
y = 0–29
x = password
None
36