Atmtsmodem Remote Configuration Escape Sequence; Vcid Caller Id Selection - Multitech MultiModem SocketModem MT9234 Series At Commands Reference Manual

%%%ATMTSMODEM Remote Configuration Escape Sequence

Description:
Syntax:
Values:
+VCID
Description:
Syntax:
Values:
Default:
Multi-Tech Systems, Inc. AT Commands for the MultiModem & SocketModem MT9234 Series (S000434H)
Downloaded from Elcodis.com electronic components distributor
Chapter 1 – AT Commands, S-Registers, and Result Codes
Initiates remote configuration mode while online with remote modem. The remote
configuration escape character (%) is defined in register S9.
%%%ATMTSMODEM<CR>
N/A
Caller ID Selection
Enables Caller ID detection and configures the reporting and presentation of the
Caller ID data that is detected after the first ring. The reported data includes the date
and time of the call, the caller's name and number, and a message. Set S0=2.
AT+VCID=<value>
+VCID=0 Disables Caller ID
+VCID=1 Enables Caller ID with formatted data
+VCID=2 Enables Caller ID with unformatted data
+VCID=? Displays the allowed values
+VCID? Displays the current value
0
35