Table of Contents
Advertisement
Available languages
Available languages
MUSIC
key: BT connection. Press three seconds to activate the BT
connection (the button starts flashing). Enable the BT connection on the
external device and research the hood (initials RN52- .......). Once
connected the button light stops blinking and stays on, the display will
show "BT". Use the external device to manage music and phone calls.
Use the key
(volume) to adjust the volume, the display will show the
volume level
To accept or end a call press the
will show "CALL". During a phone call you can adjust the volume using
the key
and
.
To disconnect the external device, hold for three seconds the
device will be disconnected and the backlight intensity of the button will
reduce in stand-by mode.
The feature
call and transfer music tracks has priority over the radio
key: Radio. Press three seconds to activate the radio. The backlight
button lights up, the display will show the radio station frequency. To
change frequency press the keys
After 10 seconds of non-use of the buttons, the display positions
volume.
Use the key
to adjust the volume, the display will show the volume
level
and
.
To change frequency press the key
To turn off the radio press the radio key
turns off and the backlight intensity of the button will reduce in stand-by
mode.
The radio does not work when the hood is already connected with BT
connection and is receiving music from the external device or when there
is an active phone call.
Phone calls and the transmission of music tracks has priority over the
radio.
In any case, after 10 seconds of unused, the display will show the volume
level.
Filters maintenance reminder
Aluminium anti-grease filters
Once the hood is switched off, after 30 hour functioning, all the LEDs of
the speed buttons switch on with a fixed light for 30 seconds to remind
that aluminium anti-grease filter need cleaning. To set the timer to zero
keep the button 0-1 pressed with the aspirator switched off until the LEDs
turn off, otherwise the timer will remain set on 30 hour functioning and
the reminder will occur again when the hood is switched off again.
Charcoal filter (for filtering hoods)
Once the hood is switched off, after 120 hour functioning, all LEDs blink
for 30 seconds to remind that the charcoal filters (if present) need to be
replaced.
To set the timer to zero keep the button 0-1 pressed with the aspirator
switched off until the LEDs turn off, otherwise the timer will remain set on
120 hour functioning and the reminder will occur again when the hood is
switched off again.
MAINTENANCE
Always disconnect the hood from the mains before carrying out any
maintenance or cleaning operation.
Particular attention should be paid to the metallic anti-grease filters that
are designed to trap particles of fat contained in the fumes. The metallic
anti-grease filters must be washed at least once a month with detergent
in hot water (or in the dish-washer).
washes. This is normal and does not mean they have to be replaced.
remove the metallic anti-grease filters open the bottom panel of the hood
and then remove the filter by the handle.
ATTENTION: the grease collected in the filters can easily catch fire and
it is therefore extremely important to clean the metallic filters on a regular
basis as per instructions.
The activated charcoal filters are designed to collect unpleasant odours
in the cooking fumes. The air is then released purified in the environment.
The charcoal filters must not be washed, but replaced 2 or 3 times a year,
depending on how much the hood is used. New filters are to be requested
directly to the manufacturer.
To replace the charcoal filters, just remove the motor protection panel,
centrally positioned between the metal filters: locking is performed with
magnetic closures; simply exert a modest manual force, without the use
of tools. At this point you can remove the charcoal filter through a rotation
of about 90° respect to their position to unhook them from the locking
lugs, accompanying then the filter downward, without the aid of tools. Fig.
3.
To reinstall the new carbon filters, reverse the operations.
In order to remove the remaining glue or any impurity, the cooker hood
must be cleaned immediately after installation and after having removed
the protective film.
The cooker hood must be cleaned frequently both internally and
externally (at least once a month).
Do not let dirt gather on the inner and outer surfaces of the hood.
To clean the exterior of the hood do not use either acid or basic products,
or abrasive sponges.
key. During a phone call, the display
key, the
and
.
and than the keys
and
for three seconds, the radio
The filters may discolour after a few
Clean the hood with a sponge dampen in warm water and a little quantity
of neutral detergent (for example dishwasher detergent), in order to
remove possible particles of grease.
Rinse with a damp cloth, removing all the detergent carefully, following
the satin finish direction on the steel surface.
Drying is very important, especially in areas where water is particularly
hard and leaves limestone.
The hood features a LED light that, in addition to offering a good lighting
and a significant energy savings, are guaranteed to last on average 10
times more than traditional lights. For replacement, contact the
Assistance Service.
All the ordinary and extraordinary maintenance can be performed without
having to remove the hood.
.
To
This appliance is marked in accordance with the
European Directive 2012/19/EC, Waste Electrical and
Electronic Equipment (WEEE).
The symbol on the product or on the packaging
indicates that the product should not be considered as
a normal household waste but must be taken to the
appropriate collection point for the recycling of
electrical and electronic equipment.
By appropriately dispose of this product, it helps to
avoid potential negative consequences for the
environment and health that may result from
inappropriate disposal of the product.
For more detailed information on recycling this
product, contact your local office, local waste disposal
service, or the shop where you purchased the product.
Advertisement
Table of Contents
