Maintenance - Galvamet Kosmo Installation, Operating And Maintenance Instructions

Change of air
By pressing the T5 control, you activate the change of air, which keeps on functioning for 24 hours.
The extractor turns on at the first speed for 5 minutes, then it turns off automatically. This timed
cycle repeats every 25 minutes.
During extraction the light of the command blinks, otherwise it is fixed.
This function is easy to deactivate by pressing the desired speed.
Adjustable and delayed self switching off
Choose the desired speed while the hood is working, then keep the speed button pressed until it starts blinking. This button corresponds to
the desired self switching off minutes. Please keep in mind that:
T1 corresponds to 5 minutes
T2 corresponds to 10 minutes
T3 corresponds to 15 minutes
While the self switching off is in function, it is possible to modify the speed previously set.
If the same command corresponds both to the time of delayed self switching off and to the speed, then the led blinks; if the commands
are different, the speed led has a fixed light.
If you select the maximum speed, after 5 minutes the extraction fan switches to the 3rd speed and will automatically turn off at such
speed.
Filters maintenance reminder
Aluminium anti-grease filters
Once the hood is switched off, after 30 hour functioning, all the leds of the speed buttons switch on with a fixed light for 30 seconds to
remind that aluminium anti-grease filter need cleaning.To set the timer to zero keep the button T1 pressed with the aspirator switched
off, otherwise the timer will remain set on 30 hour functioning and the reminder will occur again when the hood is switched off again.
Charcoal filter (for filtering hoods)
Once the hood is switched off, after 120 hour functioning, all leds blink for 30 seconds to remind that the charcoal filter need cleaning.
To set the timer to zero keep the button T1 pressed with the aspirator switched off, otherwise the timer will remain set on 120 hour
functioning and the reminder will occur again when the hood is switched off again.
Always disconnect the hood from the mains before carrying out any maintenance or cleaning operation.
Particular attention should be paid to the metallic anti-grease filters that are designed to trap particles of fat contained in the fumes. The
metallic anti-grease filters must be washed at least once a month with detergent in hot water (or in the dish-washer).
ATTENTION: the grease collected in the filters can easily catch fire and it is therefore extremely important to clean the metallic filters on a
regular basis as per instructions.
The activated charcoal filters are designed to collect unpleasant odours in the cooking fumes. The air is then released purified in the
environment. The charcoal filters must not be washed, but replaced 2 or 3 times a year, depending on how much the hood is used. New
filters are to be requested directly to the manufacturer.
In order to replace the activated charcoal filters, turn the filters until they unfasten from aspirator.
Invert the operation in order to install the new charcoal filters.
The cooker hood must be cleaned frequently both internally and externally (at least once a month).
Do not let dirt gather on the inner and outer surfaces of the hood.
To clean the exterior of the hood do not use either acid or basic products, or abrasive sponges.
Clean the hood with a sponge dampen in warm water and a little quantity of neutral detergent (for example dishwasher detergent), in
order to remove possible particles of grease.
Rinse with a damp cloth, removing all the detergent carefully, following the satin finish direction on the steel surface.
Drying is very important, especially in areas where water is particularly hard and leaves limestone.
The hood features a LED light that, in addition to offering a good lighting and a significant energy savings, are
guaranteed to last on average 10 times more than traditional lights. For replacement, contact the Assistance Service.
The present instruction manual is an integral part of the appliance itself, therefore it must be carefully kept and ALWAYS accompany it,
even in case of its assignment to another owner or user or in case the cooker hood is moved to another installation plant.
Any eventual adjustment to the electrical system, which may be necessary to install the cooker hood, must be carried out only by
competent people. Any repair carried out by no competent people may cause damages. For any repair or needed technical action
make reference to a Technical Assistance Center, which is authorized to carry out the replacement of the spare parts.
Always make sure that all the electrical parts (lights, exhaustion unit) are disconnected when the appliance is not in use.
By storms take off the main switch of the house electrical system.
The using of the cooker hood must not be other than the use of exhausting units for cooking damps on domestic kitchens. The manufacturer
does not accept any liability for damages caused by people, animals or things, by installation and maintenance mistakes or by any
illegitimate use.
Make sure that the voltage (V) and the frequency (Hz) ratings indicated on the plate inside the cooker hood correspond to the ones
available in the installation place.
We remind that the use of products functioning with electrical energy implies the observance of some essential security rules, as follows:
• This equipment is not intended for people (children included) with reduced mental or motor capacities, with lack of experience or
knowledge, unless they are supervised or unless a person responsible for their security, gives them instructions regarding the use of the
equipment. Children must be supervised in order to be sure that they do not play with the equipment.
• Any cleaning action is forbidden if the appliance hasn't been disconnected from the main power supply and if the main switch of the house
electrical system is not off. If cleaning is not carried out according to these instructions, a fire may break out.
• Do not pull, take off or twist the cable coming out from the appliance, even though this has been disconnected from the main power supply.
• Do not sprinkle or throw any water directly on the appliance.
• Do not stick any sharp tool inside the exhausting holes and into the air discharge.
• Do not take out the filters in order to reach the internal sides of the appliance in case the main switch of the house electrical system is not off.
• Do not singe or flambé directly underneath the cooker hood. Take particular care when frying to ensure that the oil does not catch fire.
6

MAINTENANCE

WARNINGS