User manual for MA evaluation boards
MA2304DNS/MA2304PNS
Setup guide
2
Setup guide
The following is included in the MA2304xNS evaluation kit:
1. An EVAL_AUDIO_MA2304xNS board
2. I
S interface boards: analog in, S/PDIF coax and S/PDIF optical
2
3. A micro USB cable
4. A 22 µH power inductor
Additional equipment required for operation and evaluation:
1. A 10 to 20 V DC power supply capable of driving 6 A (BTL) or 12 A (PBTL)
2. Loudspeaker and speaker wires, as shown in
In addition, for datasheet spec testing, as shown in
1. A 2 to 8 Ω resistor load
2. An audio analyzer with a class-D measurement filter
SPK+
SPK-
Figure 1
Setup for "speaker test" or "datasheet spec test"
User Manual
Figure 1
Figure
OR
SPK
1:
4
V 1.0
2022-08-26