Infineon MA2304DNS User Manual page 11

User manual for MA evaluation boards
MA2304DNS/MA2304PNS
Operating the demonstration board
4. Open Windows explorer and then the drive called "CRP DISABLD". Delete the file "firmware.bin":
Figure 6 Deleting the contents of the "CRP DISABLD" drive
5. Open another explorer window and browse to the software installation folder, typically
"C:\Users\[User]\Infineon\Tools\Merus-Amplifier-Tool". Copy the .bin file from the firmware folder to the
"CRP DISABLD" drive. In this example the .bin file is called "firmware.bin", but it could have other filenames.
Figure 7 Copying "firmware.bin" to the "CRP DISABLD" drive
6. Move the Jdebug header back to the second column from left to right (connecting pin 7 and 8):
Figure 8 Configuring the Jdebug header for normal operation
7. Close Windows explorer and disconnect the USB cable.
Figure 9 Disconnecting the USB cable from the evaluation board
8. The MCU firmware update is now complete.
User Manual 11 V 1.0
2022-08-26