Fusion Link Data; Figure 5-2 Fusion-Ccis Network - NEC NEAX 2400 IPX Manual

DATA PROGRAMMING
Network Data Programming Summary
Note: When the Fusion system is incorporated in an existing CCIS network, all nodes must be linked via CCIS on
the network.
If there are any nodes linked via ACIS alone, add the CCIS link before installing the Fusion link. (See
Figure 5-2.) Refer to CCIS-related manuals for more detailed information.

1.3 Fusion Link Data

• Assign the Fusion link data using the following commands:
Fusion with FCH: ACRD
Fusion w/o FCH: ACRD
Note: When the Fusion system is incorporated in an existing CCIS network, all nodes must be linked via CCIS on
the network.
If there are any nodes linked via ACIS alone, add the CCIS link before installating the Fusion link. (See
Figure 5-2 below.) Refer to CCIS-related manuals for more detailed information.
... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
A dd C C IS link.
Node C
PC =12
"82"
P C : P oint C ode (C C IS )
CHAPTER 5
Page 62
Revision 1.0
ACTK MBCT
AFPC
N ode A
PC =10
"80"
A C IS

Figure 5-2 Fusion-CCIS Network

NDA-24299
AFCH AFRT AFPC
C C IS
N ode B
P C=11
"81"
ACAN
P S TN