Figure 5-60 - NEC NEAX 2400 IPX Manual

STEP 3: MBCT
Unbusy the connection trunk data assigned in the previous step, by using the MBCT command. This
is required for FCH, FGH trunks as well as speech channels.
STEP 4: AFCH
Assign FCH number on an FCH circuit card basis. In the following example, FCHN=1 is assigned
for the FCH circuit card. For the FGH card, FCHN assignment is not necessary.
PBX
C_RT1
DTI
FGH
C_RT14
FCHN=1
FCH
C_RT13
to CPU
speech
T1
signaling
ROUTER
Q-sig
FCHEN: 000030
Figure 5-60 Assignment of FCHN (example)
NDA-24299
DATA PROGRAMMING
Assignment of FCH Related Data
AFCH command display
FCHN
1
FCHEN
Note
000030
Note
This setting is a sample.
Note:
CHAPTER 5
Page 115
Revision 1.0