Basic Parameters; Removing The Battery - Roborock S300RR User Manual

Basic parameters

Model: S300RR
Robot vacuum cleaner
Battery
Weight
Wireless Connection
Rated input
Charging Time
Model
Rated Input
Rated Output
Charging Battery
Note: The serial number is on a sticker on the underside of the robot.
14.4 V/5200 mAh lithium-ion
battery
Approx. 4.7kg
WiFi Smart Connect
20 V 1.8 A
＜ 6 h
Dock
WFD01HRR
100-240V~ 50-60Hz 0.8A
20 V 1.8 A
14.4 V/5200mAh lithium battery
Environment Protection Information

Removing the Battery

The following information applies only when disposing of the robot and should not be
followed for day-to-day operations.
The chemical substances contained in the built-in lithium-ion battery
of this product can cause environmental pollution. Remove the battery
before disposing of this product and hand it to a professional battery
recycling facility for centralized disposal.
1. Operate the robot without connecting to the dock until it runs out of battery.
2. Turn off the robot.
3. Unscrew the battery cover.
4. Remove the battery cover.
5. Press the latch to pull out the battery connector and remove the battery.
Notes:
• Before removing the battery, make sure it is fully drained and the robot is disconnected from the dock.
• Remove the entire battery pack. Avoid damaging the battery pack casing to avoid short-circuits
or leakage of hazardous substances.
• In the event of accidental contact with battery fluid, rinse thoroughly with water and seek
immediate medical care.
31