Related Manuals for Roborock S8 Pro Ultra
Summary of Contents for Roborock S8 Pro Ultra
- Page 1 Roborock S8 Pro Ultra Robotic Vacuum Cleaner User Manual Read this user manual with diagrams carefully before using this product and store it properly for future reference.
-
Page 2: Table Of Contents
English Contents English 03 Safety Information Français 04 International Symbols Explanation Deutsch 05 Product Overview Italiano 06 Installation Español 07 Connecting to the App Polski 08 Instructions Norsk 10 Routine Maintenance 12 Basic Parameters Svenska 13 Common Issues... -
Page 3: Safety Information
Restrictions WARNING • For the purposes of recharging the battery, only use the detachable supply unit roborock EWFD07HRR or EWFD08HRR provided with this product. • Do not use this product on elevated surfaces without barriers such as the floor of a loft, an open-ended terrace, or on top of furniture. -
Page 4: International Symbols Explanation
Safety Information Battery and Charging WARNING • Always use a properly grounded power outlet to minimize the risk of electric shock. If such a socket is not available, consult an electrician to make one available. • In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility. -
Page 5: Product Overview
Product Overview Robot (Bottom View) VibraRise Mop Cloth A2-1—Cliff Sensors A5-1—Hook and Loop Pads Robot (Top View) A2-2—Carpet Sensor Dustbin A2-3—Omnidirectional Wheel Mop Only/Child Lock A2-4—Side Brush A6-1—Cover Latch • Press to start mopping A2-5—Main Brushes A6-2—Filter Cover • Press and hold for 3 seconds to A2-6—Main Brush Cover A6-3—Dustbin Latch turn on/off the child lock... -
Page 6: Installation
Installation Empty Wash Fill Dock 1. Tidy cables and loose items from the ground and move any unstable, fragile, A10-1—Water Tank Handle Important Information precious, or dangerous items to prevent A10-2—Water Tank Lid personal injury or property damage due A10-3—Dirty Water Tank to items becoming tangled in, struck by, A10-4—Dock Location Beacon or knocked over by the robot. -
Page 7: Connecting To The App
“charging” voice it in. Option 1: Search for “Roborock” in the App alert sounds. To maintain the performance B1-4—more than 0.5 m (1.6 ft) Store or Google Play or scan the QR code to of the high-performance lithium-ion B1-5—more than 0.7 m (2.3 ft) -
Page 8: Instructions
The robot will Notes: then wait for a connection. • To prevent corrosion or damage, only use the Roborock branded floor cleaner in the water tank. Note: If you cannot connect to the robot due to your router •... - Page 9 Mop Only Mop Washing Drying During cleaning, the robot automatically Drying starts automatically after mop Press the button to start mopping determines when it should return to washing or after cleaning are completed. only. The main brushes rise and the main the dock for mop washing and water To manually start or stopping drying, tap brushes and fan stop operating.
-
Page 10: Routine Maintenance
Routine Child Lock Side Brush * Clean monthly and replace every 3-6 months. Maintenance Press and hold the button to enable/disable 1. Unscrew the side brush screw. the child lock. You can also set it in the app. 2. Remove and clean the side brush. Main Brushes Once enabled, the robot will not react to Reinstall the brush and tighten the screw. - Page 11 Dustbin VibraRise Mop Cloth Moving the Dock * Clean as required. * Clean after each use and replace every 3-6 months. Remove the water tanks and the dustbin C5-1— Open the top cover of the robot and C7-1— Remove the VibraRise mop cloth from before moving the dock.
-
Page 12: Basic Parameters
Basic Parameters Replacing the Disposable C15-4— Carefully place the dock upside Dust Bag down on a hard floor covered with Robot a soft towel. * Replace the disposable dust bag when it is full. C15-5— Unscrew the three screws and C14-1—... -
Page 13: Common Issues
Unable to connect to WiFi • The current Roborock robot is not supported. You can find supported models in the app. • Unable to connect to WiFi abruptly. There may be an error with your router settings. Contact Roborock customer service for additional support. - Page 14 Problem Solution • Make sure that the robot is not in DND mode. DND mode will prevent cleanup. When cleaning a space requiring a Cleaning does not resume after recharging top-up charge, if the robot was placed manually on the charging dock before it returned to the dock automatically, it will not be able to continue cleanup.
Need help?
Do you have a question about the S8 Pro Ultra and is the answer not in the manual?
Questions and answers
What do the symbols do or represent on the map screen specifically paper and pencil