Roborock S300RR User Manual page 23

Instructions for Use
Spot Cleaning
Press the button to start spot cleaning.
Cleaning range: The robot cleans a 1.5 m (4.9 ft) x 1.5 m (4.9 ft) square area
centered on itself.
Note: After spot cleaning, the robot will automatically return to the starting
point and enter Standby mode.
Pause
When the robot is running, press any button to pause it, press the
resume cleaning, press the button to send it back to the dock, and press the
button to wash the mop.
Note: Placing a paused robot on the dock manually will end the current cleanup.
Sleep
If the robot is paused for over 10 minutes, it will go to sleep, and the
power indicator will flash every few seconds. Press any button to wake
the robot up.
Notes:
• The robot will not go to sleep when it is charging.
• The robot will automatically shut down if left in sleep mode for more than 12 hours.
DND Mode
The default Do Not Disturb (DND) period is from 22:00 to 08:00. You can
use the app to disable the DND mode or modify the DND period. When
DND is on, the auto top-up is canceled, indicator lights are dimmed, and
voice alerts are quietened.
Child Lock
Press and hold the
set it in the app. Once enabled, the robot will not react to button presses
when it is stationary. When the robot is cleaning or docking, press any
button to stop it.
Charging
After WashVac, the robot will automatically return to the dock to charge.
button to In Pause mode, press the
The power indicator will pulse as the robot charges.
Note: If the robot fails to find the dock, it will automatically return to its starting location. Place the
robot on the dock manually to recharge.
Malfunction
If an error occurs, the power indicator will flash red and a voice alert will
sound. See FAQs & Troubleshooting for solutions.
Notes:
• The robot will go to sleep automatically if left in a malfunctioning state for over 10 minutes.
• Placing a malfunctioning robot on the dock manually will end the current cleanup.
Resetting the System
If the robot does not respond when a button is pressed or cannot be
turned off, reset the system. Press the Reset button, and the robot will
reset automatically.
Note: After resetting the system, scheduled cleaning, WiFi, etc. will be restored to factory settings.
23
button to enable/disable the child lock. You can also
button to send the robot back to the dock.