Table of Contents
Advertisement
Step Action
4
Perform the reflection test:
-
Connect the cable or cable
and antenna system to be
tested at the calibration point
(CAA module RF port, or RF
extension cable).
5
Enable a PASS/FAIL indicator by
setting a limit line:
-
Select the configuration icon
from the side-bar navigation
-
Select the configuration title
(the default is "Frequency")
-
Select {Limit}
-
Select {Pass/Fail} to turn it
ON
-
Select {Limit Line}
-
Set the limit line value from
the bottom-bar navigation
(e.g. -20)
-
Select {Limit Line} to turn it
ON
Description
Reflection Loss with PASS/FAIL indicator
Page 35 of 43
Advertisement
Table of Contents
