mr. steam Basic Butler Installation, Operation & Maintenance Manual page 14

.
mr steam
®
_________________________________________________________________
SETTING THE TEMPERATURE
Diagram 6: Press TEMP key to set the desired temperature or
display the temperature setting.
Diagram 7: The control is preset and will display a tempera-
ture setting of 110˚F (default setting). With the temperature
displayed, press the UP or DOWN keys to set the desired tem-
perature (80°F to 120°F) in one degree increments.
Set the steam bathing temperature according to personal
preference, however it is highly recommended to begin steam
bathing at a low temperature setting to gauge comfort and
safety levels.
MEMORY FEATURE
If the control is turned off manually before it times out then the
default settings of 20 minutes and 110°F will be used the next
time the control is turned on. If the control times out (not manu-
ally turned off) then the previous user time and temperature
settings will be used when the steambath is turned on.
PERSONAL SETTINGS Diagram 8
Use the program key to store preferred settings.
To program preferred settings:
Press the Program key once to program Pr 1.
Press it twice to program Pr 2. The selected parameter
will be displayed. Enter the preferred time and
temperature settings.
The iTempoPlus will store the following settings: set point, time
duration & aroma state. To select Pr 1 or Pr 2:
select Pr 1, press it twice to select Pr 2. The steambath will
begin to operate at the stored settings.
Installation & Operating Instructions
mr.steam
DIAGRAM 6
aroma chroma
mr.steam
DIAGRAM 7
temp
mr.steam
DIAGRAM 8
temp
aroma chroma
Drawings for Illustrative Purposes Only.
time
time
chroma
time
13