steam towelwarmers ® Installation, Operation & Maintenance Instructions _________________________________________________________________ HOMEOWNER: INSTALLER: ___________________________________________________ _______________________________________________ READ THIS ENTIRE INSTRUCTION MANUAL THOROUGHLY BEFORE THANK YOU for selecting Mr.Steam Towel Warmer, the perfect BEGINNING INSTALLATION. LEAVE THESE INSTRUCTIONS WITH addition to bathrooms, family spas, and exercise rooms within HOMEOWNER.
steam towelwarmers ® Installation, Operation & Maintenance Instructions _________________________________________________________________ WALL PREPARATION C A U T I O N • DO NOT mount the Towel Warmer without providing structurally secure upper and lower headers as shown. • DO NOT mount the Towel Warmer directly to sheet Finished wall surface rock or any other non-structural surface.
steam towelwarmers ® Installation, Operation & Maintenance Instructions _________________________________________________________________ INSTALLATION: W328, W336, W348 WA R N I N G BOX CONTENTS: TO PREVENT SHOCK HAZARD, THE ELECTRICITY MUST BE • (4) Mounting bolts • Towel Warmer TURNED OFF AT THE MAIN PANEL BEFORE ANY WIRING IS DONE. •...
steam towelwarmers ® Installation, Operation & Maintenance Instructions _______________________________________________________________ ELECTRICAL CONNECTIONS 1. Assemble the BX cable BX Cable* (or greenfield) connector to the wiring box escutcheon as shown. WA R N I N G TO PREVENT SHOCK HAZARD, THE Wiring Box Escutcheon ELECTRICITY MUST BE TURNED OFF AT THE MAIN NOTE: NM (non-metallic) cable,...
® Installation, Operation & Maintenance Instructions _________________________________________________________________ GENERAL: Field Installed Wall Switch or Mr. Steam Digital Programmable Timer The Towel Warmer requires 120 VAC, 50/60 PN: 103588DIG Hz power. Specific amperage needed is listed in the Towel Warmer Specifications Chart on page 3 of this manual.
Need help?
Do you have a question about the W328SSP and is the answer not in the manual?
Questions and answers