mr. steam Basic Butler Installation, Operation & Maintenance Manual page 11

.
mr steam
®
_________________________________________________________________
TIMER FEATURE
When the control is turned ON a 60 minute time
duration is initiated. The control will turn off
after 60 minutes unless the control is turned off
manually.
MEMORY FEATURE
If the control is turned off manually before 60
minutes then the default temperature of 110˚F
will be used the next time the control is turned
on. If the control times out at 60 minutes (not
manually turned off) then the previous user tem-
perature setting will be used when the steam-
bath is used again.
SETTING THE TEMPERATURE
Diagram 3
The control is pre-set and will display the tem-
perature setting of 110˚F (default setting). Use
the UP and DOWN keys to change the tempera-
ture setting from 80˚ F to 120˚ F in one degree
increments.
CHANGING THE TEMPERATURE
UNITS
OFF key for 10 seconds. The temperature units
will be displayed as Fahrenheit (TuF) or Celsius
accept the new units and exit.
Installation & Operating Instructions
DIAGRAM 3
mr.steam
DIAGRAM 4
Drawings for Illustrative Purposes Only.
Display
Up Key
Pause Key
Down Key
ON/OFF
Key
10