Itempoplus Operating Instructions - mr. steam Basic Butler Installation, Operation & Maintenance Manual

.
mr steam
®
_________________________________________________________________
iTempoPlus ® Operating Instructions
The iTempoPlus Control features programmable
temperature control, programmable time duration,
clock, AromaSteam, ChromaSteam
two personal settings.
Set the steam bathing temperature
!
WARNING
according to personal preference, however it is highly
recommended to begin steam bathing at a low
temperature setting for a very short duration to gauge
comfort and safety levels.
POWERING UP THE UNIT Diagram 1
When the generator is first powered up or after a
power interruption, the clock display flashes and the
clock is ready to be set up.
NOTE:
even if the clock has not been set.
The clock can only be set when the generator
NOTE:
is OFF, the display is flashing.
SETTING THE CLOCK
ON/OFF Diagram 2
steam. The Temperature Set Point is displayed. Steam
will begin to flow a few minutes after the control is
turned ON. The duration required for the steam room
to reach steam bathing temperatures depends on the
steam room construction and steam generator speci-
fications. Steam may continue to flow for a short time
after the control is turned OFF.
®
Installation & Operating Instructions
mr.steam
temp time
aroma chroma
DIAGRAM 1
mr.steam
temp time
aroma chroma
DIAGRAM 2
Drawings for Illustrative Purposes Only.
11