AT&T Synapse Installation Manual page 19

8. Continue configuring the system using the WebUI. See
9. Complete post-installation tasks.
If you have set the system to use Call Appearance mode, ask all users to record their user names on their Desksets.

See "Name Recording for the Auto Attendant Directory" in the Synapse Administrator's Guide at
www.telephones.att.com/synapseguides
If you have set the system to use Call Appearance mode, distribute and register any Cordless Handsets or Headsets.

Synapse Cordless Handsets are not compatible with Line Appearance mode. See
on page 49 and "TL7600 Cordless Headset Installation" on page
Check for software upgrades and register your Synapse system products. See

Installation
Synapse Installation Guide
"System Configuration" on page
.
18
79.
"SB67040 Cordless Handset Installation"
52.
"Product Registration" on page 129.