Mocka Kuranda Stool Assembly Instructions

Advertisement

Kuranda Stool
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
D
long screw
screw
allen key
felt
x16
x4
x1
pad x4

Hardware Supplied

Phillips screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Kuranda Stool and is the answer not in the manual?

Questions and answers

Summary of Contents for Mocka Kuranda Stool

  • Page 1 Please follow the instructions below for correct assembly. long screw screw allen key felt pad x4 Hardware Supplied Phillips screwdrivers required. For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 2 Attach panels [2] to panels [3] and [4], secure with 8x long screws (A) Attach panel [6] to panel [3], panel [5] to [4] as shown. as shown. Tighten with an allen key (C). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 3 Tighten with an allen key (C). with a screwdriver. Attach 4x felt pads (D) to panels [3] and [6] as shown. Once assembled lift furniture into place, do not drag. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...

Table of Contents