CalAmp TSLM User Manual page 40

SECTION 7
Baud Rate
Baud Rate shows the current baud rate setting for the Primary and Secondary COM ports.
RTS
RTS shows the current state of the RTS (request to send) line. RTS is an output from the
PC.
DTR
DTR shows the current state of the DTR (data terminal ready) line. DTR is an output from
the PC.
CTS
CTS shows the current state of the CTS (clear to send) line. CTS is an input to the PC.
DSR
DSR shows the current state of the DSR (data set ready) line. DSR is an input to the PC.
DCD
DCD shows the current state of the DCD (data carrier detect) line. DCD is an input to the
PC.
Bytes Tx'ed
Bytes Transmitted shows the number of bytes (characters) transmitted since the port was
last opened or cleared.
Bytes Rx'ed
Bytes Received shows the number of bytes (characters) received since the port was last
opened or cleared.
Framing Errors
Framing Errors shows the number of Framing Errors received since the port was last opened
or cleared.
um_tslm rev3.doc
Page 40 of 62