Table of Contents
Advertisement
INSTALLATION GUIDELINES
ART-NET | sACN CONNECTION
When connecting fixture to a network switch to control multiple devices, a Gigabit Ethernet
Switch that supports IGMP (Internet Group Management Protocol) is required. Using a Gigabit
Ethernet Switch that does not support IGMP can cause erratic behavior of all connected
devices to the switch. Click link below for more information about IGMP.
https://en.wikipedia.org/wiki/Internet_Group_Management_Protocol
POWER AND DATA CABLES
ENSURE ALL CONNECTIONS AND ENDCAPS ARE PROPERLY SEALED WITH
DIELECTRIC GREASE (AVAILABLE AT MOST ELECTRICAL SUPPLIERS) TO PREVENT
WATER CORROSION AND/OR ELECTRICAL SHORT CIRCUIT.
TO MAINTAIN THE IP65 RATING INTEGRITY OF THE FIXTURE AND PREVENT WATER
FROM ENTERING THE FIXTURE, SEAL ALL UNUSED CONNECTION RUBBER CAPS.
INCLUDED RJ45 DATA CABLE
lTHE INCLUDED RJ45 DATA CABLE IS FOR FIXTURE TO FIXTURE INTERCONNECTION
ONLY! THE RJ45 CABLE CONNECTORS MAY NOT BE COMPATIBLE WITH OTHER
RJ45/ETHERCON TYPE CONNECTORS.
20
Advertisement
Table of Contents
