Elation Proteus Brutus User Manual page 18

I N S TA L L AT I O N G U I D E L I N E S
OMEGA BRACKETS WITH CLAMP INSTALLATION
Insert the Omega Brackets into the matching holes on the bottom of the fixture. Secure the
Omega Brackets to the fixture by turning each quick-lock fastener ¼ turn clockwise; making
sure the fastener is completely locked. Omega Brackets can be installed into the fixture base
as illustrated below.
ALWAYS ATTACH AN APPROPRIATELY RATED
SAFETY CABLE WHENEVER INSTALLING THIS
FIXTURE IN A SUSPENDED ENVIRONMENT
TO ENSURE THE FIXTURE WILL NOT FALL IF
THE CLAMP FAILS.
MOUNTING THE FIXTURE ON A TRUSS USING CLAMPS WITH OMEGA BRACKETS
When mounting the fixture to a truss, be sure to secure an appropriately rated professional
grade rigging clamp to the included Omega Brackets using an M10 screw fitted through the
center hole of the Omega Brackets. The fixture provides built-in rigging points for a SAFETY
CABLE (not included). Be sure to only use one of the designated rigging points for the safety
cable and never secure a safety cable to a carrying handle.
SAFETY CABLE
18