Table of Contents
Advertisement
Quick Links
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
Assemble the product as close to its intended final location/room as possible.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Further instructions are on the following pages.
Please keep these instructions for future reference.
Loxley Bed - Double
Assembly Instructions
.
.
www.happybeds.co.uk
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Happy Beds Loxley Bed Double
Summary of Contents for Happy Beds Loxley Bed Double
- Page 1 Loxley Bed - Double Assembly Instructions Important before assembly: Read these instructions carefully before assembling or using the product. Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and fittings. Assemble the product as close to its intended final location/room as possible.
- Page 2 These tools are not necessary, but may help to assemble the product. Do NOT use any power tools as this may damage the frame. (Not metal) This product or some parts of this product will be heavy. Please use an assistant when lifting. Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints.
- Page 3 Box 1 Slats (x26) Headboard (x1) Box 2 B. Side Rails (x2) Centre Support Rail (x1) Support Leg (x2) Footboard (x1) G. Legs (x4) H. M8x30mm Bolts (x12) Flat Washer (x8) Spring Washer (x8) Nuts (x4) M5 Allen Key (x1) N.
- Page 4 Step 1 Unpack all components from the boxes and check you are not missing anything. Please check these against the list on Page 3. Should you identify any missing components, please contact the retailer you purchased the bed from. Step 2 Attach 2x Legs to the 1x Headboard and then attach 2x Legs...
- Page 5 Step 3 Next, attach 2x Support Leg ( ) to 1x Centre Support Rail ( ) using 4x M8x40mm Bolts ( ), Allen Key ( ), 4x Nuts ( ) and Spanner ( Step 4 Attach 2 x Side rails (B) to 1 x Headboard (A) and 1 x Footboard (D) using 8 x M8x30mm Bolt (H), 8 x Spring Washer (K), 8 x Flat Washer (J) and 1 x M5 Allen Key (L).
- Page 6 Step 5 Slot each Slat Cap (N) onto the end of each Slat (F), then slot each Slat (F) into each Centre Slat Cap (O). Press firmly into each slat rail located on the inside of the side rails (B) and then into the Centre Support Rail (C).
- Page 7 Please dispose of all packaging safely. General Care & Maintenance Wipe clean with a slightly damp cloth. Avoid the use of all household cleaners and abrasives. Periodically check all screw & fixings to ensure they are secure. When moving your product, carefully lift into place. Never drag or push the product across the floor as this will cause damage to the joints.
Need help?
Do you have a question about the Loxley Bed Double and is the answer not in the manual?
Questions and answers