Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Happy Beds Manuals
  4. Indoor Furnishing
  5. Chelsea Velvet Bed 4ft6 Double
  6. Assembly instructions manual

Happy Beds Halfden Wooden Fabric Bed 4FT6 Double Assembly Instructions Manual

Hide thumbs Also See for Halfden Wooden Fabric Bed 4FT6 Double:

Advertisement

Quick Links

Download this manual
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
Assemble the product as close to its intended final location/room as possible.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Further instructions are on the following pages.
Please keep these instructions for future reference.
Halfden Wooden Fabric
Bed - 4FT6 Double
Assembly Instructions
.
www.happybeds.co.uk

Advertisement

loading
Need help?

Need help?

Do you have a question about the Halfden Wooden Fabric Bed 4FT6 Double and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Happy Beds Halfden Wooden Fabric Bed 4FT6 Double

Summary of Contents for Happy Beds Halfden Wooden Fabric Bed 4FT6 Double

  • Page 1 Halfden Wooden Fabric Bed - 4FT6 Double Assembly Instructions Important before assembly: Read these instructions carefully before assembling or using the product. Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and fittings. Assemble the product as close to its intended final location/room as possible.
  • Page 2 These tools are not necessary, but may help to assemble the product. Do NOT use any power tools as this may damage the frame. (Not metal) This product or some parts of this product will be heavy. Please use an assistant when lifting. Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints.
  • Page 3 HALFDEN- Double Assembly Instructions Before y ou be g in ... Please check in your desired room of use. Unpack all boxes and lay out each component on the floor. Check your product for any damage that may be immediately obvious. If damage is identified, please contact your retailer.
  • Page 4 1.Headboard (x1) 2.Headboard Legs (UR) (x2) 3.Footboard Legs (x2) 4.Support Legs (x2) 5.Footboard (x1) 6.Siderail (x2) 7.Slats (x1) a.Centre Rail (x1) 9.Top Slat (x1) Page 3 of9...
  • Page 5 ] Hardware [ All filling are stored within Box 1 111111111\> � B.M6 A.MG x 40 mm JCBC (x6) x 50 mm JCBC (x6) C.Allen Key M4 x 65 mm (xl) D.M4 x 25 mm CSK (x2) 11111111111 ► E.M4 x 32 mm CSK (x33) F.Spring Washers (x10) G.Flat Washers (xl0)

  • Page 6: Back View

    Step 2 Unzip the black non-woven fabric on the back of headboard and take small carton out. BACK VIEW Step 3 Install the 12 x wood dowel (I) to 2 x headboard leg (2R/L) and 2 x footboard leg (3). FRONT VIEW .,,,,0 DO NOT use any power tools as this may damage the frame and will invalidate any claim.
  • Page 7 Step 4 Attach 2 x side rail (C) to 1 x footboard (5) with 2 x footboard legs (3) and 2 x headboard legs (2R/L) as shown. FRONT VIEW Step 5 Slot 1 x headboard (1) to the 2 x headboard Legs (2R/L) as shown. DO NOT use any power tools as this may damage the frame and will invalidate any claim.
  • Page 8 Step 6 Attach 1 x headboard (1) to the 2 x headboard Legs (2R/L) as shown. Step 7 Attach the 2x Support Leg (4) to 1x Centre Rail (9) using 2x M6x40mm JCBC (A) and 1x M4 Allen Key (C). Then screw 2x Adjuster (H) to Support Leg (4). ATTENTION: Please keep the adjuster around 5 to 8 mm distant away from the floor.
  • Page 9 Step 8 Firstly, Slot the 1x centre rail (6) into the bracket on 1x Headboard (1) and 1x Footboard (2). Then secure using 2x M4x25mm CSK (D) and Screwdriver (Not Provided). Attention : Please ensure that (D) screw is attached as per the A.I shown to avoid possibility of base collapsing.
  • Page 10 Step 10 Affix the 1 x top slat (9) to the support wood on 1 x footboard (2). Page 8 of9...
  • Page 11 Please dispose of all packaging safely. General Care & Maintenance Wipe clean with a slightly damp cloth. Avoid the use of all household cleaners and abrasives. Periodically check all screw & fixings to ensure they are secure. When moving your product, carefully lift into place. Never drag or push the product across the floor as this will cause damage to the joints.