BMW E87 2009 Owner's Handbook Manual page 70

Text messages
Text messages at the top of the Control Display
explain the meaning of the indicator and warn-
ing lights being shown.
Supplementary text messages
Via Check Control, you can call up additional
information on the Control Display, e.g. regard-
ing the cause of a fault and the corresponding
measures to be taken.
In the case of urgent messages, the text is dis-
played automatically.
To exit the display:
Select "OK" and press the controller.
Hiding Check Control messages
Press the button on the turn indicator lever.
> Some Check Control messages are dis-
played permanently and remain until the
fault has been repaired. If there are a
number of malfunctions simultaneously,
the messages are displayed in succession.
These messages can be hidden for approx.
8 seconds. They are then displayed again
automatically.
68
Online Edition for Part no. 01 41 2 602 816 - © 08/09 BMW AG Online Edition for Part no. 01 41 2 602 816 - © 08/09 BMW AG
Depending on your vehicle's equip-
ment, they may be marked with the
symbol shown here.
> Other Check Control messages are auto-
matically hidden after approx. 20 seconds.
They remain saved and can be displayed
again.
Depending on your vehicle's equip-
ment, they may be marked with the
symbol shown here.
Displaying Check Control messages
stored in memory
1. Press button 1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa-
nied by the word "CHECK".
2. Press button 2.
"CHECK OK" appears if there are no Check
Control messages. If a Check Control mes-
sage has been stored, the corresponding
light is shown. It is accompanied by a text
message on the Control Display.
3. Press button 1 to check for other mes-
sages.
4. Press button 2.
The display again shows the outside tem-
perature and the time.
Via iDrive
1. "Vehicle information"
2. "Vehicle status"