Table of Contents
Advertisement
3.
Select the desired station.
4.
Press and hold down the controller.
5.
Select the desired memory location.
The stations are stored for the remote control
currently in use.
Via favourites buttons
You can also store a station on the favourites
buttons, see page 18.
1.
Select the station.
2.
...
Press the desired button for
longer.
Radio Data System RDS*
Additional information is broadcast via RDS on
the FM waveband. RDS stations therefore offer
the following features:
>
Where a radio station is broadcast on sev-
eral frequencies, the set automatically
switches to whichever frequency offers the
best reception.
>
Where reception conditions are good, the
names of stations are displayed on the Con-
trol Display. Where reception is poor or in
the event of interference, it may take some
time before the station names will appear in
the display.
Switching RDS on/off
1.
"Radio"
2.
"FM"
3.
Call up "Options".
132
Online Edition for Part no. 01 41 2 602 816 - © 08/09 BMW AG
Online Edition for Part no. 01 41 2 602 816 - © 08/09 BMW AG
4.
"RDS"
The setting is stored for the remote control cur-
rently in use.
Regional programmes*
Certain FM stations broadcast regional pro-
grammes at certain times of day. The following
settings are possible:
>
REG function on:
Recommended setting. The set regional
programme is retained for as long as possi-
ble. Reception quality may deteriorate
when you go beyond its transmission area.
With poor reception quality over a longer
period of time, a switch is made to a regional
programme with better reception.
>
REG function off:
When you leave the transmission area for
the regional station that is tuned, the radio
changes over to a new regional station if
available. When in an area with two or more
regional stations, the radio may switch to
and fro between the stations. If this hap-
pens, switch on the REG function.
Switching REG function on/off
1.
"Radio"
2.
"FM"
3.
Call up "Options".
Hide quick links:
Advertisement
Chapters
Table of Contents
