BMW E87 2009 Owner's Handbook Manual page 42

Seat heating*
Press the button once per temperature stage.
Three LEDs indicate the highest temperature.
To switch off:
Press and do not immediately release the but-
ton.
If you continue driving within approx.
15 minutes, the seat heating is automatically
activated at the previously set temperature.
If necessary, the temperature is reduced or
even switched off entirely in order to prevent
battery discharge. The LEDs remain lit.
Seat and mirror memory*
You can save and call up two different combina-
tions of driver's-seat and outside-mirror posi-
tions.
Settings for the seat back width and lumbar
support are not stored in memory.
Memorising
1. Switch on radio readiness or the ignition,
see page 48.
2. Adjust the seat and outside mirrors to the
desired positions.
40
Online Edition for Part no. 01 41 2 602 816 - © 08/09 BMW AG Online Edition for Part no. 01 41 2 602 816 - © 08/09 BMW AG
3. Press the button.
The LED in the button comes on.
4. Press the desired memory button 1 or 2: the
LED goes out.
Calling up
Do not call up memory while you are driv-
ing, as unexpected seat movement could
result in an accident.<
Comfort function
1. Unlock and open the driver's door or switch
on radio readiness, see page 48.
2. Briefly press the desired memory button 1
or 2.
The adjusting procedure is halted when you
press a seat adjustment switch or touch one
of the memory buttons.
Safety function
1. Close the driver's door and switch the igni-
tion on or off, see page 48.
2. Press the desired memory button 1 or 2
until the adjusting procedure is completed.
If the button was pressed accidentally:
Press the button again; the LED will go out.
Calling up with the remote control
The driver's seat position last set is stored for
the remote control currently in use.
You can select whether the seat is reset to that
position automatically.
When this Personal Profile function is
used, first make sure that the footwell
behind the driver's seat is free of obstacles.
Otherwise, persons could be injured or objects
could be damaged should the seat start to
move towards the rear.<
The adjusting procedure is halted when you
press a seat adjustment switch or touch one of
the memory buttons.
Selecting automatic call-up
1. "Settings"
2. "Door locks"