1.TROUBLESHOOTING FOR THE HARDWARE
The second to fourth drawers
Open the paper source drawer, and remove the misfed paper.
1
Check that the guide width is correct, there is no folded/curled paper or overloading, and then
2
close the drawer.
Drawers (Except for e-STUDIO2020AC/2520AC)
Open the paper source drawer, and remove the misfed paper.
1
Check that the guide width is correct, there is no folded/curled paper or overloading, and then
2
close the drawer.
Be sure that the height of the stacked paper does not exceed the line indicated inside of the side guides.
28 Clearing a Paper Misfeed