Toshiba E-STUDIO 2020ac Troubleshooting Manual page 61

1.TROUBLESHOOTING FOR THE HARDWARE
2 Place the paper corresponding to the set size in the drawer.
Check that the guide width is correct and there is no folded/curled paper or overloading, and
3
then close the drawer.
Be sure that the height of the stacked paper does not exceed the line indicated inside of the side guides.
In particular, be sure that the upper limit for thick paper is not exceeded when placing thick paper in the first
drawer of the e-STUDIO2020AC/2520AC. The amount of thick paper you can load in the drawer is lower than that
for plain paper.
Clear the paper misfeed following the guidance shown on the touch panel. Then close all the
4
drawers and covers.
Printing resumes.
Clearing a Paper Misfeed 61